2022-4-6 14:10:29
After the crane is used, it needs to be maintained and cleaned by everyone. How to maintain and clean the crane? Shandong gantry crane manufacturer will introduce it to you.
1. Brake: the spring is intact without fracture damage; The back cap is fastened without looseness; The pin of holding brake magnet cross bar shall be free of deformation and fracture; The frame pivot pin and anchor screw are intact without looseness and change; The coupling screws of the holding brake wheel are fastened without looseness.
2. Gearbox: the combination and foundation screws are fastened without looseness; There is no oil leakage on the combination surface, and the oil level and quality are normal; Good lubrication; External cleaning; Listen carefully for abnormal sounds.
3. Coupling: the coupling screws are fastened without looseness; The coupling has no oil leakage; Refuel regularly; External cleaning.
4. Gear drum: there is no dislocation when the teeth are meshed; The big and small gears are free of damage, well lubricated, and the shield is intact and firm; The coupling screws between the big gear and the drum are fastened without movement.
5. Bearing seat: the assembly and foundation screws are fastened without looseness; The oil cup is intact, with sufficient oil and no deterioration; Tighten and refuel properly during inspection; External cleaning.
