2022-4-6 14:10:30
Today, Shandong gantry crane manufacturer brings us the differences and advantages between European cranes and old cranes.
1、 For the same 10 ton single beam crane, the advantages of European single beam and old single beam are compared:
1. From the trolley wheel to the hook high point of the old hoist: 1550mm; from the European small wheel to the hook high point: 0.74mm, a difference of about 0.8mm, which means that the house can be reduced by 0.8m, and the total cost of the house will also be reduced.
2. European style flat wheel, running smoothly.
3. European style has high preparation and high working level, which can reach A5
4. Good environmental protection can reduce noise, have a small impact on the plant and increase the service life of the house.
5. Novel, fashionable appearance and elegant appearance can improve the image and grade of the whole factory.
6. Moreover, the European style gourd has a hard tooth surface, with large bearing capacity and strong wear resistance.
2、 For the same 20 ton double beam crane, the advantages of European double beam and double beam old single beam are compared:
1. The gap between the trolley wheel and the high point of the hook of the old double beam hoist is 0.3mm, which can be reduced by 0.3m, and the total cost of the house will also be reduced.
2. The total bearing capacity of the house will be reduced, and the total cost of the house will be reduced.
3. European crane has high configuration and high working level, which can reach A4 or A5
4. European gourd is hard tooth surface, with large bearing capacity and strong wear resistance. The noise is low and the environment is good. After the frequency conversion, the impact of the crane on the plant is small, and the service life of the house is increased.
5. Novel, fashionable appearance and elegant appearance can improve the image and grade of the whole factory.
