2022-4-6 14:10:30
The maintenance of single beam crane is very important. When some small problems occur, they will be handled in time to avoid more serious situations. In particular, the wear of the single beam crane needs more attention. How to prevent abrasion of single beam crane?
In order to prolong the service life of Shandong single beam crane manufacturer, the effective method is to reduce the wear of various components, but before that, we must first understand the causes of component wear. The reasons for wear are different, and the preventive measures are also different. For example, the wear caused by friction can be solved by adding lubricating oil at the friction position and removing impurity particles.
However, if the wear caused by corrosion cannot be achieved, the correct practice should start from replacing materials, and try to use crane accessories that do not react chemically or electrochemically, so as to prevent the effect of wear.
When the reducer of single beam crane has problems, the traditional repair method is welding repair or brush plating repair, but both of them have certain defects. For example, repair welding is easy to produce irreparable thermal stress, resulting in deformation or fracture of parts; However, brush plating repair is easily limited by thickness, and the problem remains unsolved.
Therefore, a good way is to replace the materials of reducer parts with high polymer HDPE materials. This will not affect the thermal stress of repair welding, nor will it be limited by the repair thickness. The important thing is that it can avoid the possibility of repeated wear, greatly extend the service life of the reducer, and reduce the failure rate of the single beam crane.
